Machine Introduction:

Introduction:

The automatic sealing and cutting machine can be used for automatic production line shrink packaging of products. It uses photoelectric to automatically detect products. It can choose two modes of automatic feeding or manual feeding. It adopts half-folding film and can seal the other three sides. The constant temperature heating sealing and cutting system can be used for sealing and cutting various industrial standard heat sealing films such as PE, POF, etc. The seal is firm and beautiful, especially suitable for POF sealing and cutting. When the product size is changed, it only needs to be simply adjusted by the hand wheel, without replacing any parts, reducing the product replacement time and making it easier to operate. The speed-adjustable front-end feeding system and the back-end storage working platform make the whole machine work truly high-speed, unmanned automatic operation.

1.Main Specification：

2. Instructions for the main switch

(1) Itinerary setting The longer the time is, the longer the excess part of the shrink film will be, and it will be unsightly after shrinking. (After shrinking the packaging, the film will produce slack). Note: When the time is too short, it is also possible that the sealing and cutting knife cuts to the package, usually within 0.1-0.5 seconds (but the time is different due to the thickness of the package).

(2)  Counter When the package passes the electric eye switch, and the sealing and cutting knife descends and then rises, the digits on the counter will be displayed. *(Return the digit on the counter to zero, just press the "RESET" button in the upper right corner)

(3) On the radio eye switch (installed on both sides of the conveyor belt) When the package passes through the electric eye, the stroke setter takes effect, and the sealing and cutting knife descends for sealing and cutting.

(4) Selection switch The manual position must be selected when installing the film or debugging the machine. At this time, the conveyor belt does not run and the electric eye is closed. The automatic position is selected for the formal packaging, at this time the conveyor belt is running and the electric eye is activated. When the packaging material touches the electric eye, the sealing knife will automatically drop. Be careful not to touch the electric eye with your hands.

(5) Sealing and cutting temperature Usually the horizontal seal is set at about 180°C, and the vertical seal is set at about 300°C. (The material and thickness of the shrink film are different).

(6) Sealing time Usually set at 0.8 seconds. (The material and thickness of the shrink film are different).

 The cylinder Drain the water at least once a month (the white button near the bottom of the cylinder, the water will come out), check the oil at least once a month.          

Main Electric Components：

BSN4020C Heat Shrink Tunnel 

1、Technical Data：

2.Main Electric Components：

Characteristics

1. Adopt strip glue sprayer can save glue, paste more strongly,avoided glue leakage;

2. Robot- Arm can make positioning in high accuracy;

3. With pressing system can stick case and box strongly without bubble and non-scratched;

4. Non-scratching boarding feeding system can protect box surface well;

5. Simple- operation no need experienced worker.

Main Technical Parameters：

2.Operation interface: All parameter settings and function switches are operated on the touch screen. There are "jog, start, emergency stop, speed adjustment" shortcut operation buttons on the periphery of the operation panel.

3.Positioning part: The chain guide bar is made of imported polymer materials that are wear-resistant and silent. The paper positioning uses square push blocks and brushes to increase the stability of high-speed paper operation.

4、Gluing section: The transverse and longitudinal directions of the gluing roller are driven by motors respectively, and can be directly adjusted in two directions without stopping the machine. The gluing section also has a gap avoidance function (servo control) to prevent glue from contacting the belt and reduce frequent accidents due to gaps. The trouble of shutting down the machine to clean the belt.

5、Film pasting department: Film feeding adopts servo motor transmission and roller adsorption for continuous pasting. Compared with traditional intermittent pasting, it has the advantages of fast pasting speed, high precision and low film requirements.

6、Film unwinding section: It is faster and more convenient to install and replace film on the air-expanding shaft. The electromagnetic tension control system keeps the film unwinding tension constant at an ideal state, making the film more precise. Servo controls film roll feeding and corner cutting positions to improve production accuracy and efficiency.

7. Paper delivery platform: The paper delivery platform uses a separate servo-controlled belt to operate. The stacking distance can be adjusted as a whole or in sections, and runs at multiple speeds. Can be used continuously, paused, and points flexibly.

8. Electrical system: The whole machine adopts full servo motion control, and various electrical components and detection switches are made from products from Japan, Taiwan, France, Germany and other companies.

I、 K18 Board Slitter Introduction

I、 Main features

u The rotary knives are made of high-quality alloy, which makes it durable and can cut various boards.

u The large-sized boards are fed manually and can be cut into long-bar-type boards.

u The small-sized boards are propelled with a high-precision thread rod to finish slitting.

u The cut edges on the left and right ends are smashed with a spiral cutter and can be automatically discharged.

u The finished product delivery conveyer belt can stack the products in a good order.

u The automatic centralized oil supply device is used to timely and quantitatively lubricate every part.

u It adopted the PLC and HMI controller, which makes it more vivid and friendly in its operation.

I、 Technical Specifications

Technical Specifications

1. Case size (open case length x width)

Min. 200 × 100mm

Max. 800 × 450mm

1. Cloth：

Width: 130-480mm

Length：230-830mm

Thickness: 120-300g/m^2

2. Board thickness：1-4 mm

3. Folded paper edge size:  12 - 20 mm

4. Spine Min. size：8 mm

5. Mechanical speed：40 cycles/minute （Net production speed depends on the sizes, materials etc.）

6. Working power:  9KW

7. Heating Power：9KW (heating used time-sharing, when the temperature reaches the set temperature, the heating rod stops working)

8. Voltage：380V / 50HZ / 3P

9. Precision：±0.5 mm

10. Max. quantity of Cardboard：6 pieces （Upgrade to 7 pieces if buyer have special request）

11. Net Weight：3500KG

12. Dimension (L*W*H): 4600 × 3300 × 1800 mm

Remark：

u The maximum and minimum dimensions of the case, depending on the maximum and minimum size of the cloth and the quality of the cloth.

u The mechanical speed is 40-45 cycles per minute, but the size of the cloth affects the speed of the machine.

u Maximum stacking height of cardboard: 210 mm

u Maximum stacking height of cloth: 160 mm

Advantages:

 · Full automatically lock bottom, automatically feeding and folding.

· Automatic counting and kicking function of optical fiber induction. Machine can add auto film cutting function at your wishes.

· Make PVC、PET、PP printing and without printing plastic box；

 · For PUR gluing box, machine has unique pressing equipment which help box fixed immediately .High efficiency and save labors

 · Imported variable frequency motor, adjustable speed, stable performance Humanized design, quick and easy to adjust the machine, easy to operate, a hexagon wrench can adjust most parts; 

Page 2

Composition:

1. Anterior sucked feeding mechanism

2. Motorized chain gripper auto-positioning system

3. Independent Hi-frequency generator

4. Hydraulic controlled Hi-frequency Pressing block

5. Hydraulic controlled mold-cut pressing block

6. Hydraulic & pneumatic combined dynamical system

7. Automatic collecting and shooting system

8. PLC & Touch Screen Control

Technical Parameter:

Configuration List:

Main Feature:

Pre-Stack material; Automatic feeding with double sheets warning; Automatic Positioning; Crease line first (can make folding line more soft and smooth, easy to fold and make box more beautiful); Heating die cut system (can make material more smooth without scratch and edge wrapping)

Products : Printing tissue paper

Grammage : 17gsm

Printing: 1-6colors and CMYK Process

Feature : 1.Moisture Proof,smooth tissue wrapping paper

                2.eco-friendly, Acid-Free

Application :

Wrapping for furit, gift ,flower, shoes ,hardware , wine ,leatherwear ,bag ,decoupage ,paper flower ,etc.

Specification:

Speed: 10-80m/min

Paper Thickness: 100-500g/㎡

Max Sheet Size:  910*1100mm (1100)

                                   1200*1100mm ( 1100A)

                                   1450*1100mm ( 1100B)

                                   1200*1200mm ( 1200)

                                   1300*1680mm ( 1300)

                                   1450*1680mm (1450)

Min Sheet Size:    300*300mm

Total Power Required:  Approx 55-60K

Net Weight:  Approx 12.6T ( 1100)

                     Approx 12.7T ( 1100)

                     Approx 12.8T ( 1100)

                     Approx 13T ( 1100)

                     Approx 15T ( 1100)

                     Approx 16.5T (1100)

For The Use Of Film:   OPP/PET/PVC

Feeder Unit:

                                                              Feeder Head- Adopt high speed no shaft feeder

head of printing machine. With Servo Control System，make feeding stabler.

Feeder Suction- Strong Four sucker and Four feeder specially for big size and thickness sheet.

Main & auxiliary board position limit sensor switch: 

limit the height of 

the paper feeding table, so as to avoid too high or too low.

Position Limiting Electric eye：Accurately detecting the height of the feeding table, so that can make feeding more smooth.

Feeder hear position limit sensor: Effectively limit feeder to move in a suitable position.

Feeder head manual control lead screw: Easy to adjust and operate

Side lay- Paper Aligning Device - Auto servo control easy to adjust and stabler

BECKER Vacuum Pump - High Pressure，Smaller Noise， Lower Maintenance，Feeding Paper stabler.

Non-Overlapping Testing：                                 

Temperature Sensor：can be adjusted temperature by interface to clean dust on each sheet.

Side Lay Paper Non-overlapping Testing: Can test overlapping  matter and alarm solving matter.

Electromagnetic Heating System:

Host Accessories Grease Applying Device & Oil Pressure Pump:

Accessories Grease Applying Device: Easy to apply oil and daily maintenance.

Oil Pressure Pump: each machine will equip a oil pressure Pump for our daily applying grease. Very convenient!!!

Gluing & Film Roll Loading Device:

Gluing Device-High precision laser engraved ceramic roller and scraper system assure

gluing thinner and more smooth. 

Film loading roller- easy to install and load film roll.

Magnetic Powder Tension Control Device:

Can be easy to adjust tension of film loading roller, so that can fix the roll and loading film roll conveniently.                                                    

Film Breaking Photoelectric Device:

This Device can test out film breaking matter and alarm to stop operation for avoiding the fault.

Men-machine Interface

Humanity Design- Rotatable interface and easy operation.

Germany SIEMENS Motor + ZIK Speed Reducer

Germany SIEMENS Main Motor+Transtec Speed Reducer

Paper Anti-curl Device:

Paper Anti-Curl Device - Specially design,can adjust based on suitable angles to avoid paper curling.

Flying Knife Cutting System & Control Interface: 

                                                                                                Control Interface: Specially for controlling cutting, make working more easier and stable.

Flying Knife Cutting Device:Adopt YASKAWA Servo motor control.Specially designed for PET Foil Film cutting.More stable and accuracy.                                                                        

Ultrasonic Paper Sensor & Paper Jam Electric Eye Device:

Buffering Wheel：effectively buffer to receive paper sheet.

Paper Receiving Buffering Encoder: control 

buffering wheel to receive Paper sheet.

Stacker:

Triple side paper aligning device assure

Paper collecting in alignment under high

Speed production.

Equipped with counting device assure

Non-stop paper collection.

Un-separated Sheet Waste Discharge Device:

Once the electric eye test out, waste sheet automatically shoot out by waste switch.

1.Non-stop Stacker sensor--When receiving board is full of paper, it can test out and make board drop automatically.

2. Jobbing Counter sensor-- count paper sheet accurately and conveniently!!!

Electric Component:

Electrical components adopt PLC Control System imported and domestic first class brand. More accurate and stabler.

                                            Which brand we use?

                                           （Germany）：Siemens、SKF、BECKER、MACHER

                                            （Japan）:YASKAWA、NSK、OMRON、Keyence

Main Feature

1. Precision: 0.3-0.5mm, we are the NO.1 accurate.

2. Mode: 1380mm,1200mm, Min. cut size 50mm (W) 120mm(L)

3. Function: manual feed board, simple and valuable

Can be used for cutting of gray board,corrugate board,plastic board,wooden box, medium density fiberboard,slurry board

●Technical Parameters:

Specification may be slightly adjusted for better use.

●Description of parts:

Paper Feeding Assembly

● It adopts the stablest way of paper feeding. It adopts servo motor with intermittent belt to feed paper via the bottom, instead of traditional clutch control, to feed paper continuously. The user may use human-machine interface to adjust feeding distance and duration according to paper size.

Filming Assembly

●The base material can be adjusted horizontally; Double pneumatic device for making grooves and cutting corner can be adjusted in four directions, and waste material can be collected together; The pressure for making grooves can be adjusted; The film length can be adjusted without stopping servo motor; Cutting mode: the upper and lower cutter moves alternately; Special filming mechanism achieves 0.5mm tolerance after pushing, blocking and locating. Data memory function.

Gluing Assembly

● lt adopts 304 stainless steel cylinder to drive glue , and use scraper device to adjust the thickness and width of glue and save glue at the great extent. The user may use flexo template for gluing accurately and efficiently. Gluing position can be adjusted left and right reely or front and back via phase regulator while maintaining normal operation. The rollers can be disengaged to avoid glue on belt in case of no paper. Glue container is inverted so that the glue goes out smoothly and it is easy to clean.

Paper Collecting Assembly

●It adopts belt convey and stacked device to collect paper.

●Technical Parameters:

Specification may be slightly adjusted for better use.

●Description of parts:

suction cylinder

Paper feeder

● Automatic compensation of the feeder timing in case of changing friction or belt wear

● Feeding length adjustment via teach-in button with only one blank. It does not get any easier

Gluing unit

● Cleaning in two minutes by means of the integrated cleaning system

● Full splash guard

Paper feeder

● Ensures excellent flatness of the blanks (even when curved). The best application tolerance for the film, both in running and lateral direction

receiving department

● Laterally movable delivery ensures better ergonomics when mounting heavy film reels or working on the cutting station

Operation

● The most convenient high-speed operation

● PLC computer program control, in the man-machine interface on the coefficient of fast operation, easy to use.

1. Standard function:

This machine adopts the Taida PLC and stepping motor. Its operation is easy; its maintenance is convenient; its stickup of magnet and metal sheet can be accurate;  it is durable in use; Small dimension makes convenient to operate and move.

2. Scope:

It’s widely used in box making such as rigid  box, book-type box, gift box, hardcover box and other boxes assembled with magnet and metal sheet.

3. Technical Parameter:

MATERIALS

Carton Board                                         Corrugated Board

2. FEATURES

Automatic sheet to sheet carton laminator machine. Easy to operate and quick set-up. Suitable for all packaging industry, display floor stands, sidewalk signs, outdoor displays, poster displays.

3.Top FEEDER
	l  Total height 2,600 mm. l  Streaming feeding   suction head. l  Feeder bridge with   double sheet detector. l  8 sets of lifting   suckers. l  4 sets of joggers and   spring type side guide to control and transfer the substrate. l  Side guide metering   adjustment for flute width setting.
4. Flute feeder
l  Friction feeder system   by perforated belts and suction (Power 2.2 kW). l  Brake system by   electromagnetic clutch. l  Registration System   with micrometer adjustment for excellent register when laminating cardboard   with cardboard.
5. Laminating   unit
	l  Main motor power 5.5 kW. l  Coater consists of 2 rollers. The glue comes from the top until reach   the gap between the application roller and metering roller. l  The glue flow that is pumped out is controlled by a sensor. l  Washing roller, it is used to remove unwanted glue stains from   pressing cylinder, avoiding the flute to stain. l  Laminating precision +/- 1.5 mm. l  The gauges can be moved by motors through Touch screen plate automatically.
6. Pressure   conveyor unit
l  Total length 6,000 mm. l  Independent motorized (total power 2.2 kW). l  Conveyor system with uniform and balanced pressure to ensure optimum   quality in any type of work to be processed. l  Upper conveyor moves back and forward.

7. Main electrical components and brand

MATERIALS

Carton Board                                         Corrugated Board

2. FEATURES

Automatic sheet to sheet carton laminator machine. Easy to operate and quick set-up. Suitable for all packaging industry, display floor stands, sidewalk signs, outdoor displays, poster displays.

3.Top FEEDER
	l  Total height 2,600 mm. l  Streaming feeding   suction head. l  Feeder bridge with   double sheet detector. l  8 sets of lifting   suckers. l  4 sets of joggers and   spring type side guide to control and transfer the substrate. l  Side guide metering   adjustment for flute width setting.
4. Flute feeder
l  Friction feeder system   by perforated belts and suction (Power 2.2 kW). l  Brake system by   electromagnetic clutch. l  Registration System   with micrometer adjustment for excellent register when laminating cardboard   with cardboard.
5. Laminating   unit
	l  Main motor power 5.5 kW. l  Coater consists of 2 rollers. The glue comes from the top until reach   the gap between the application roller and metering roller. l  The glue flow that is pumped out is controlled by a sensor. l  Washing roller, it is used to remove unwanted glue stains from   pressing cylinder, avoiding the flute to stain. l  Laminating precision +/- 1.5 mm. l  The gauges can be moved by motors through Touch screen plate automatically.
6. Pressure   conveyor unit
l  Total length 6,000 mm. l  Independent motorized (total power 2.2 kW). l  Conveyor system with uniform and balanced pressure to ensure optimum   quality in any type of work to be processed. l  Upper conveyor moves back and forward.

7. Main electrical components and brand

MATERIALS

Carton Board                                         Corrugated Board

2. FEATURES

Automatic sheet to sheet carton laminator machine. Easy to operate and quick set-up. Suitable for all packaging industry, display floor stands, sidewalk signs, outdoor displays, poster displays.

3.Top FEEDER
	l  Total height 2,600 mm. l  Streaming feeding   suction head. l  Feeder bridge with   double sheet detector. l  8 sets of lifting   suckers. l  4 sets of joggers and   spring type side guide to control and transfer the substrate. l  Side guide metering   adjustment for flute width setting.
4. Flute feeder
l  Friction feeder system   by perforated belts and suction (Power 2.2 kW). l  Brake system by   electromagnetic clutch. l  Registration System   with micrometer adjustment for excellent register when laminating cardboard   with cardboard.
5. Laminating   unit
	l  Main motor power 5.5 kW. l  Coater consists of 2 rollers. The glue comes from the top until reach   the gap between the application roller and metering roller. l  The glue flow that is pumped out is controlled by a sensor. l  Washing roller, it is used to remove unwanted glue stains from   pressing cylinder, avoiding the flute to stain. l  Laminating precision +/- 1.5 mm. l  The gauges can be moved by motors through Touch screen plate automatically.
6. Pressure   conveyor unit
l  Total length 6,000 mm. l  Independent motorized (total power 2.2 kW). l  Conveyor system with uniform and balanced pressure to ensure optimum   quality in any type of work to be processed. l  Upper conveyor moves back and forward.

7. Main electrical components and brand

‍

‍

Sitck corner tape is make from imported kraft paper,PET(polyester) and other baase cloth and coated with polyester hot-melt adhesive. It’s mainly used for semi-auto and full-auto corner pasting machine. It has strong adhesion, high temperature resistance,fast speed and less lost. It is necessary for gift box making process.

Packing Details  :

1) All corners are protected by protection strips
2) All packed in high quality plywood pallets with height 1-1.15M
3) The whole pallet is wrapped by waterproof film and fixed by two pieces steel strip

Packing Details  :

1) All corners are protected by protection strips
2) All packed in high quality plywood pallets with height 1-1.15M
3) The whole pallet is wrapped by waterproof film and fixed by two pieces steel strip

Features:

1. Easy to use, according to different speed of the machine

2. In addition to having strong viscosity, but also have very good flexibility, can avoid brittle,deformation,mildew and foaming.

3. Clean,environmental protection,sanitation,and with good smell,not like normal animal glue odor

4. It’s more convenient to use than hot-melt glue power,bone glue,easy to clean(warm water scrub can clean)

5. Viscosity stable

6. It’s eco-friendly no harm to human

Technical Parameters:

Electric Fumigation

 

 Introduction ：

1.Pedal single-arm pressing device and temperature control system.

2. Manual box-flipping, applicable to various paper boxes.

3. Paste angle by Eco- friendly hot melt adhesive tape.

4. tape length can be 5-35mm .

 Specification：

introduction

JXT-1000SXH Book style packing machine,  The equipment adopts servo positioning, positioning accuracy ±0.3mm, the whole machine using intelligent PLC control, simple operation,、not only faster but also produce black dumb rubber, gold and silver cards, etc.

Characteristics

1,The equipment imported glue spraying system, precision can reach ±0.3mm, optional spraying system.

2, The whole servo control is high efficiency, high-speed, production rate 20-30pcs / min.

3, Dispensing module can complete the two-way movement.

4, Powerful, can be set two boxes at one time.

5, using vision module & glue spraying to position, complete machine is easy to control and learn.

6, Equipment structure is simple and practical, Fast changing mode (about 30 minutes). 

Technical Specification

Introduction

    It is used to paste files, photo album, cover of notebook, and also available to make diversified high-grade paper products like gift box, moon cake box, hard box etc. which is the ideal choice for large, medium and small package industry. 

Features

1、Adjustable gluing rollers apply smooth coating on the paper surface.
2、We used the solid cast copper pump, and high corrosion resistant roller.

3、The circular glue system with temperature controller assures the adequate glue consistency.
4、A built-in washing system, cleans up within 5 minutes.
5、Conveyor belt device suction system, guarantee cover paper absorbed on the conveyor belt, to avoid bending, sparkling.

Technical Parameters

    

Introduction

   This machine adopts the newest independent design single layer leading edge paper feeder system. The new feeder valve mechanism ensures the long-term stability in its movement.Adopts air suction to convey paper to prevent deflection of paper, which is suitable for different sizes of paper. With high precision front pivot positioning system and magnetic side board, paper can be adjusted automatically which is flexible and firm. To make sure the same overlap, the distance between the front and back paper can be adjusted.

The conveyor is with stain ball, which enable the all-round pressing paper feeding work stable and smooth without deflection.

With professional customized gear pump of frequency conversion and speed adjustment, glue supply system makes sure the stable supply of glue when it work under high intensify and speed. The circle design greatly  lowers the cost of glue. High precision adjustable gluing cylinder makes operation easier, coating more even and glue save.

Circle water tape and channel as well as indirect heating and temperature control system can ensure the glue has been under stable and suitable degree of adhesive. Built-in clean system can finish the cleaning job within 5 minutes. 

specification:

Introduction:

This product applies for grooving of different sizes of gift box, book style box, moon-cake box, paperboard box, with the good appearance and the higher level of product, to reach customer satisfaction. This machine is environmental and energy saving, it is the ideal choice for manufacturing high level gift boxes.

product Name Duplex coated white grey board Material Mixed waste paper pulp Color Two sides white Standard size 31*43inch; 35*47inch. Special sizes are welcome ! Standard gsm 230,250,270,300,350,400,450 Brand JXT package In roll or in sheet

Packing Details  : 

1) All corners are protected by protection strips

product Name Duplex coated white grey back     board Material Mixed waste paper pulp Color  white + grey Standard size 31*43inch; 35*47inch. Special sizes are welcome ! Standard gsm 230,250,270,300,350,400,450 Brand JXT package In roll or in sheet

Packing Details  : 

1) All corners are protected by protection strips

 Introduction：

1 Automatic Corner Paste Machine consists of three parts: feeder, corner paste machine and output conveyor.

2 Working principle: Grey board shall be conveyed to corner paste machine by feeder. Corner paste machine can locate the board and press it automatically, making four corners of grey board fixed with adhesive tapes and get a basic box.Finally the finished box will fall onto the belt conveyor for output.

3 Three types of adhesive tape is available: kraft tape, thin kraft paper and super-thin scotch tape.

Specification：

 Introduction ： 

1.Automatic forming machine, which mainly applies to rigid boxes such as the boxes of mobile phones, cosmetics and jewelry.

2. Adopt the horizontal structure,with separated main shaft and mould pull system,  whole height is 2065mm, to facilitate the material transport and equipment positioning.

3 This machine has an outstanding feature of high precision，easy to adjust. Its maximum folding deep can be 85mm，paper length even reaching 100mm so that long ears can be folded completely.

4 Main transmission adopts high precision screw rack gear grinding can be operated stable

.

5.This machine is controlled by PLC, man-machine interface with touch screen, the parameters of box size can be set flexibly. It can be used with many surface gluing machine in a state of high efficiency and stable performance. It can make boxes with good effect, clean appearance without wrinkles or bubbles. It will be more economical and practical when used together with the feeder gluing machine.

6 This machine adopts the security screens, approach switch and accident protection switch, which made the equipment safe and reliable.